Stamping11 min read
Sourcing stampings from India: tooling, quality and logistics
The clusters that make stamped parts, the tooling lead times to plan for, and the quality and freight decisions that decide whether a programme lands on time.
Read
Sourcing notes for custom parts
Drawings, tooling, quality and landed cost, from the team that runs the programmes.
All guides, page 34
Browse the full library.
Stamping10 min read
Stamped contact springs: force, deflection and stress
The cantilever model behind a stamped contact spring, a worked example in phosphor bronze, and the geometry changes that raise force without overstressing the beam.
Read
Stamping10 min read
Aluminium stampings: alloy choice and galling
Why aluminium behaves differently in a press, how to choose an alloy and temper for the form, and the die, lubrication and speed changes that keep galling out of the strip.
Read
Busbars10 min read
Busbar design for marine and offshore
Salt air, constant vibration and a classification review change the busbar drawing. The finish and the support are as important as the current rating.
Read
Stamping9 min read
Progressive die maintenance: what a buyer should ask
The die is the programme's capacity. Maintenance records, spare tooling and a clear trigger for a die pull tell you more about a supplier than the piece price does.
Read
Stamping10 min read
Prototype stamping: soft tooling, laser blanks and bridge dies
Four practical routes to stamped samples without a production die, what each one proves, and how to choose when the design is still moving.
Read
Stamping9 min read
Stamping RFQ checklist: what to send for a useful quote
The drawing, volume, material, finish and quality information that separate a quote you can compare from a number you have to rework.
Read
Stamping9 min read
Stamping vs CNC machining: choosing for flat parts
When a flat part should be cut from sheet in a die and when it should be milled from plate, with the tolerance, material waste and volume maths that decide it.
Read
Busbars10 min read
Busbar for industrial automation and drives
A drive cabinet is a heat, space and switching problem in one box. The busbar layout decides how much of each you have to solve.
Read
Stamping10 min read
Metal stamping vs laser cutting: volume, cost and edge quality
A cost and capability comparison for flat metal parts, including the crossover volume, the edge each process leaves and the cases where using both is the right answer.
Read
Stamping9 min read
Pre-plated material: stamping without post-plating
Coil that arrives already coated can remove a whole process step. It can also expose bare edges, damage the finish and cost more than the plating it replaces.
Read
Stamping10 min read
Stamping cost drivers and how to negotiate them
Material, tooling, press time, scrap and finish make up the piece price. A should-cost view shows which of them a buyer can actually move.
Read
Go from reading to checking
The guides are built around the same questions as the free tools. Size a busbar, check an ISO 2768 callout, build a first article report or compare landed cost.
The Qumek dispatch
One useful email a month
Drawing notes, supplier checks, tariff changes and the questions buyers keep asking. No newsletter filler, no daily drip.