Stamping9 min read
Stamping tool transfer checklist
What to verify before a die leaves one press or supplier for another, from die condition and press match to the trial run and the documents that follow the tool.
Read
Topic hub
Sheet metal stamping
Stamping rewards parts that are designed around the tool from the start. This section covers strip layout, bend design, tolerances, tooling economics and the defects that show up after the first trial.
Guides in this topic
Stamping11 min read
Sheet metal stamping design guide: 10 rules that lower cost
The geometry, tolerance and tooling decisions that separate a stamped part that quotes well from one that needs a redesign.
Read
Stamping10 min read
Beryllium copper stampings: forming and heat treatment
How to form a beryllium copper contact without cracking it, age it to the right strength and conductivity, and control the dust that makes the alloy a regulated material.
Read
Stamping9 min read
Die wear and tool life: how volume affects unit price
Tooling is a fixed cost, wear is a variable one. The volume you commit decides which of them dominates the piece price, and when a new die is cheaper than an old one.
Read
Stamping9 min read
Minimum hole size and hole-to-edge distance in stamping
Practical limits for small holes, narrow webs and edge distances in a stamped part, with the material effects and the design fixes that keep a punch alive.
Read
Stamping11 min read
Sourcing stampings from India: tooling, quality and logistics
The clusters that make stamped parts, the tooling lead times to plan for, and the quality and freight decisions that decide whether a programme lands on time.
Read
Stamping10 min read
Stamped contact springs: force, deflection and stress
The cantilever model behind a stamped contact spring, a worked example in phosphor bronze, and the geometry changes that raise force without overstressing the beam.
Read
Stamping10 min read
Aluminium stampings: alloy choice and galling
Why aluminium behaves differently in a press, how to choose an alloy and temper for the form, and the die, lubrication and speed changes that keep galling out of the strip.
Read
Stamping9 min read
Progressive die maintenance: what a buyer should ask
The die is the programme's capacity. Maintenance records, spare tooling and a clear trigger for a die pull tell you more about a supplier than the piece price does.
Read
Stamping10 min read
Prototype stamping: soft tooling, laser blanks and bridge dies
Four practical routes to stamped samples without a production die, what each one proves, and how to choose when the design is still moving.
Read
Stamping9 min read
Stamping RFQ checklist: what to send for a useful quote
The drawing, volume, material, finish and quality information that separate a quote you can compare from a number you have to rework.
Read
Stamping9 min read
Stamping vs CNC machining: choosing for flat parts
When a flat part should be cut from sheet in a die and when it should be milled from plate, with the tolerance, material waste and volume maths that decide it.
Read
The Qumek dispatch
One useful email a month
Drawing notes, supplier checks, tariff changes and the questions buyers keep asking. No newsletter filler, no daily drip.